EemaX EMT6 Instruction Manual download pdf (Page 10)

FILLING THE WATER HEATER

CAUTION!: Before plugging the water heater electric cord into an

outlet, be sure that the system is completely charged with water

and ALL AIR IS REMOVED.

Before connecting the power, ll the tank and system with water and

check for leaks. To be sure that all air is out of the water system, open

the hot water faucets on your xtures until constant water ows from

them. Otherwise any air remaining in the tank will cause the water

heater element to self destruct.

Filling the water heater:

1. Open the hot water faucet.

2. Open the cold water supply valve.

3. When continuous water ows out of the faucet, the tank is lled.

4. Close the hot water faucet.

5. Check entire system for leaks.

USING THE SUPPLIED AERATOR (EMT1 model only)

Model EMT1 is supplied with a .5 GPM faucet mounted aerator. It is

highly recommended that the aerator be used together with model EMT1.

The purpose of the aerator is to restrict the amount of water ow exit-

ing the EMT1 which allows the water heater to produce hot water for a

longer duration. If the aerator is not used the 1.3 gallon capacity of the

EMT1 will be depleted quickly.

Page 9

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

No comments

EemaX EMT6 Instruction Manual Page 10